The Mountz STC40 is a power supply that operates with select Mountz electric screwdrivers. It is a single tool controller that is designed to operate at either 110v and 230v. The unit is can connect with the Scout screw counting system.
- Selectable output voltage
- Over Heat Protection (OHP) and Over Current Protection (OCP) protect drivers from damage or malfunction.
- Temperature Detection powers down the unit and resets automatically when the unit restores to acceptable levels.
- Switchable 110V & 230V input voltage. The unit will reset itself if motor/current overload is too high
- Start & Stop Signal Output (for PLC).
- Screwdriver Lock Signal Input (for PLC).
- The unit can be connected to the Scout Screw Counter
- Operates with Electric Screwdriver Models: LF-Series, BF-Series and NF-Series.
Reviews
There are no reviews yet