- For work in serial production
- Adjustment knob can be unscrewed after setting the trigger torque – unintentional changing of the setpoint torque is thus prevented
- The included TORX® Tamper Resistant fuse screw also protects against tampering as well as the included adhesive seals No adjustment possible without breaking the seal
- Triggering
- No reset to “0” required, since measuring element is only loaded during the tightening process
- Mount for interchangeable bits/sockets
- QuickRelease safety lock
- Fast, precise adjustment with QuickSelect quick adjustment
- Dual stop signal
- Easy to read double scale with colour differentiation of N·m/ft·lb and ft·lb/in·lb respectively
- Counter-clockwise tightening by turning the bits/sockets
- Continued loading after triggering or loading against the operating direction, e.g. with screws that are stuck, does not affect the triggering mechanism, which is therefore protected from damage.
- 2-component handle with hand-friendly green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)
- Calibration with perfectControl® calibration system No. 7794 or calibration device No. 7706. Where applicable Readjustment does not require disassembly
- Certificate in accordance with DIN EN ISO 6789-2:2017
- DBGM
- In a sturdy plastic box (size 80-100 in sturdy steel box)
- Display deviation ± 3%
Stahlwille – 96503012 – Service MANOSKOP torque wrench w.mount for insert tools No. 730 Fix Measuring r. 25-130N·m Tool holders 14 x 18 mm L. 421mm
Service MANOSKOP torque wrench w.mount for insert tools No. 730 Fix Measuring r. 25-130N·m Tool holders 14 x 18 mm L. 421mm
£359.52 ex VAT - £431.42 inc VAT
On back order, expected shipping 2-3 weeks
